LagAbuse.com

General Section => Technical support => Topic started by: heuwhgjlksdoi on June 10, 2013, 19:36

Title: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 10, 2013, 19:36

Hello to everybody! I got the following problems :
1) I played a game with the bot 4 hours ago but now when I make a map and the game starts after a few seconds the gproxy says that I'm disconnected due to a socket error, it reconnects and when I move the character the game blocks. There are no more players in the game - only I because I want to try something.
2) I made this account because it doesn't send me an email with the password of my other account. I tried a few times, but nothing, didn't receive any email. The account is : mioehgiuwnrv

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 11, 2013, 19:46

Earlier today I tested it again and there was the following result : when there are 2 or more players everything is ok but when the other player leaves it writes that the gproxy has lost the connection, reconnects, and everything blocks again. So that happens only when I'm the only player in the game.. Any ideas ? I still haven't received any email with the password of the other account.

Title: Re: Disconnected due to a socket error ?
Post by: kingW3 on June 11, 2013, 20:05

You should get this message Rejected by remote server: player not found in any running games.But overall you can't be the only one in game,not sure is it because ghost ends the game when there is only one player or the gproxy does :P I'm not sure about the account upper,you should wait for someone with a higher position.

Title: Re: Disconnected due to a socket error ?
Post by: div.ide on June 11, 2013, 20:05

If there's only one player left, bot assumes game is over, and drops last player. It's not a bug, it's a feature.

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 12, 2013, 09:03

Clear, thanks. I hope I could ask something more :
1) Is there a command that make the bot to public the game automatically and start it when all the slots are occupired? I mean that I don't have to write down .pub every minute.
2) How can I upload more maps to the bot because the site that was given in one topic doesn't work ?

Title: Re: Disconnected due to a socket error ?
Post by: Blind_Joker on June 12, 2013, 09:05

Quote from: heuwhgjlksdoi on June 12, 2013, 09:03

Clear, thanks. I hope I could ask something more :
1) Is there a command that make the bot to public the game automatically and start it when all the slots are occupired? I mean that I don't have to write down .pub every minute.
2) How can I upload more maps to the bot because the site that was given in one topic doesn't work ?

1. No there is not such a comand.
2. Only admins can upload maps. You can ask for map upload http://lagabuse.com/forum/index.php/topic,41098.465.html

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 12, 2013, 09:23

Quote

1. No there is not such a comand.
2. Only admins can upload maps. You can ask for map upload http://lagabuse.com/forum/index.php/topic,41098.465.html

Thanks for the answer but I can't open the map link list which is given in the first page so that I can see which maps have already been uploaded. I still can't believe that the bot hasn't got any version of xherosiege.

Title: Re: Disconnected due to a socket error ?
Post by: Blind_Joker on June 12, 2013, 09:59

Quote from: heuwhgjlksdoi on June 12, 2013, 09:23

Quote

1. No there is not such a comand.
2. Only admins can upload maps. You can ask for map upload http://lagabuse.com/forum/index.php/topic,41098.465.html

Thanks for the answer but I can't open the map link list which is given in the first page so that I can see which maps have already been uploaded. I still can't believe that the bot hasn't got any version of xherosiege.

You just have to whisper proper name of uploaded map and thats it...

X Hero Siege 1.33.w3x
X Hero Siege 1.41.w3x
X Hero Siege 1.54.w3x
X Hero Siege 1.55.w3x
X Hero Siege 1.57.w3x
X Hero Siege 2.32.w3x
X Hero Siege 3.12.w3x
X_Hero_Siege_3.23.w3x
X_Hero_Siege_3.28.w3x
X_Hero_Siege_328.w3x
X_Hero_Siege_3.30.w3x
X_Hero_Siege_3.32.w3x
X_Hero_Siege_3.33.w3x
X_Hero_Siege_3.36~1.w3x
X_Hero_Siege_3.36.w3x
X hero Siege 3.37 Pro.w3x
X_Hero_Siege_3.45.w3x
X_Hero_Siege_3.66b_Final.w3x
X_Hero_Siege_3.66.w3x
X_Hero_Siege_4.56.w3x
X_Hero_Siege_4.80.w3x
X Hero Siege F-DAY 3.40.w3x
X Hero Siege F-Day 4.20b.w3x
X Hero Siege F-Day 4.20.w3x
X Hero Siege F-Day 4.24a.w3x
X Hero Siege F-Day 5.0 by Fuxxi.w3x
X hero Siege Final.w3x
x hero siege fozen v2.21 Fix.w3x
x hero siege fozen v2.21.w3x
x hero siege fx-day 4.5kz.w3x
X_Hero_Siege_Ice_HD_3.85.w3x
X Hero Siege Ultimatum.w3x
X Hero Siege v3.45 (Hacked Version).w3x
X Hero Siege v3.45 Pro.w3x
X Hero Siege v3.45z .w3x
X Hero Siege v4.80.w3x
X Hero Siege v5.50.w3x
X Hero Siege v6.10.w3x
X Hero Siege v6.30.w3x
X Hero Siege v6.33b.w3x

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 12, 2013, 10:49

Quote from: Blind_Joker on June 12, 2013, 09:59

Quote from: heuwhgjlksdoi on June 12, 2013, 09:23

Quote

1. No there is not such a comand.
2. Only admins can upload maps. You can ask for map upload http://lagabuse.com/forum/index.php/topic,41098.465.html

Thanks for the answer but I can't open the map link list which is given in the first page so that I can see which maps have already been uploaded. I still can't believe that the bot hasn't got any version of xherosiege.

You just have to whisper proper name of uploaded map and thats it...

X Hero Siege 1.33.w3x
X Hero Siege 1.41.w3x
X Hero Siege 1.54.w3x
X Hero Siege 1.55.w3x
X Hero Siege 1.57.w3x
X Hero Siege 2.32.w3x
X Hero Siege 3.12.w3x
X_Hero_Siege_3.23.w3x
X_Hero_Siege_3.28.w3x
X_Hero_Siege_328.w3x
X_Hero_Siege_3.30.w3x
X_Hero_Siege_3.32.w3x
X_Hero_Siege_3.33.w3x
X_Hero_Siege_3.36~1.w3x
X_Hero_Siege_3.36.w3x
X hero Siege 3.37 Pro.w3x
X_Hero_Siege_3.45.w3x
X_Hero_Siege_3.66b_Final.w3x
X_Hero_Siege_3.66.w3x
X_Hero_Siege_4.56.w3x
X_Hero_Siege_4.80.w3x
X Hero Siege F-DAY 3.40.w3x
X Hero Siege F-Day 4.20b.w3x
X Hero Siege F-Day 4.20.w3x
X Hero Siege F-Day 4.24a.w3x
X Hero Siege F-Day 5.0 by Fuxxi.w3x
X hero Siege Final.w3x
x hero siege fozen v2.21 Fix.w3x
x hero siege fozen v2.21.w3x
x hero siege fx-day 4.5kz.w3x
X_Hero_Siege_Ice_HD_3.85.w3x
X Hero Siege Ultimatum.w3x
X Hero Siege v3.45 (Hacked Version).w3x
X Hero Siege v3.45 Pro.w3x
X Hero Siege v3.45z .w3x
X Hero Siege v4.80.w3x
X Hero Siege v5.50.w3x
X Hero Siege v6.10.w3x
X Hero Siege v6.30.w3x
X Hero Siege v6.33b.w3x

Thanks a lot! I tried everything - xherosiege, x_hero_siege, etc. everything you can imagine but no result haha Finally I'll be able to play it. I think that the topic is over. Thanks for the explanations again.

Title: Re: Disconnected due to a socket error ?
Post by: div.ide on June 12, 2013, 11:50

If you're trying to load map file, then - from personal experience - you're better off using partial match at your advantage. Blind guessing entire map file might not work. Now, here's a little tip - try to include part involving map version. Example:

Say you want to load X Hero Siege v6.30.w3x

Writing entire name is tedious, and if you don't have access to list, map might simply not be there (or be there, but with different filename).
Writing X Hero Siege v6.30.w3x gives you no results, because too many maps will match the pattern (bot won't even respond, because list would be too long).

X Hero Siege 1.33.w3x
X Hero Siege 1.41.w3x
X Hero Siege 1.54.w3x
X Hero Siege 1.55.w3x
etc.

Now, if you try X Hero Siege v6.30.w3x - that thing will most likely immediately give you correct file.

Title: Re: Disconnected due to a socket error ?
Post by: GREED on June 12, 2013, 14:10

Quote from: div.ide on June 12, 2013, 11:50

If you're trying to load map file, then - from personal experience - you're better off using partial match at your advantage. Blind guessing entire map file might not work. Now, here's a little tip - try to include part involving map version. Example:

Say you want to load X Hero Siege v6.30.w3x

Writing entire name is tedious, and if you don't have access to list, map might simply not be there (or be there, but with different filename).
Writing X Hero Siege v6.30.w3x gives you no results, because too many maps will match the pattern (bot won't even respond, because list would be too long).

X Hero Siege 1.33.w3x
X Hero Siege 1.41.w3x
X Hero Siege 1.54.w3x
X Hero Siege 1.55.w3x
etc.

Now, if you try X Hero Siege v6.30.w3x - that thing will most likely immediately give you correct file.

if you understand this, you will find what you are searching  for. fastest way

Title: Re: Disconnected due to a socket error ?
Post by: Natura Sonoris on June 12, 2013, 14:14

http://lagabuse.com/forum/index.php/topic,40.0.html

All you need for commands.As for maps , try different numbers and words , you find it manually easy.

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 12, 2013, 18:05

Something really strange is happening right now.. when I try to host a game it doesn't appear in the list of games and this doesn't happen with all maps. I mean that when I load in the bot maps like custom hero survival or pyramid escape and type .pub .. the game doesn't appear in the list but then I try to host LegionTD appears immediately. Is there any kind of problem with these maps or what ?

Title: Re: Disconnected due to a socket error ?
Post by: GREED on June 12, 2013, 18:18

Quote from: heuwhgjlksdoi on June 12, 2013, 18:05

Something really strange is happening right now.. when I try to host a game it doesn't appear in the list of games and this doesn't happen with all maps. I mean that when I load in the bot maps like custom hero survival or pyramid escape and type .pub .. the game doesn't appear in the list but then I try to host LegionTD appears immediately. Is there any kind of problem with these maps or what ?

did u loaded map? or it doesnt appear "in the list"

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 12, 2013, 18:29

Quote

did u loaded map? or it doesnt appear "in the list"

I load the map, type .pub (game name) and it says that the game is created but I can't find it in the game list. Then I go back to the channel and write down .pub (game name) again but it says that there is a game in the lobby and I can't make another one unless I unhost the previous game. After a few seconds the game unhosts automatically ( maybe because nobody can see it and nobody can enter in it ). And this happens only with these 2 maps. In fact 4 hours ago I loaded pyramid escape and hosted it successfully ( the game was visible in the lobby ) but now it doesn't appear. Can it be because of the server because we all now that now it is overflooded ?

Title: Re: Disconnected due to a socket error ?
Post by: Natura Sonoris on June 12, 2013, 18:35

I think this happens when you load map which you dont have in W3 map folder.

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 12, 2013, 19:24

Quote from: AC on June 12, 2013, 18:35

I think this happens when you load map which you dont have in W3 map folder.

I don't think so. In fact today when I loaded pyramid escape and the game was visible I didn't have that map and I downloaded it when I entered in the game. When I first started to use the bot I didn't have many of the maps but the games were visible in the lobby. I'm trying again but the result is the same. To be true I have got the hoihoi8's custom hero survival on my computer because I played it a lot before stopping with the game.

Title: Re: Disconnected due to a socket error ?
Post by: GREED on June 12, 2013, 19:49

after u load map, try pub it some simple gn like:   .gopriv 1
and then dont serach it in custom games list, just try typing 1 and enter it.

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 13, 2013, 10:02

Quote from: GREED on June 12, 2013, 19:49

after u load map, try pub it some simple gn like:   .gopriv 1
and then dont serach it in custom games list, just try typing 1 and enter it.

I'm trying it right now but it says that the game doesn't exist and can't find it but when I go back to the channel and write .pub it says that I have a hosted game and have to unhost it before hosting another one. Have you tried to host the same maps to see whether they'll be visible in the lobby ? There may be some problems with the maps ?

Title: Re: Disconnected due to a socket error ?
Post by: kingW3 on June 13, 2013, 10:08

You should try entering/searching when you get a whisper from the bot Creating public game [xxx] started by [xxxx].
Because it takes some time to create it and then you might need to wait few seconds till it appear.

Title: Re: Disconnected due to a socket error ?
Post by: heuwhgjlksdoi on June 13, 2013, 11:10

Quote from: kingW3 on June 13, 2013, 10:08

You should try entering/searching when you get a whisper from the bot Creating public game [xxx] started by [xxxx].
Because it takes some time to create it and then you might need to wait few seconds till it appear.

I know. We have solved half of the problem.. I don't know how but now I can host pyramid escape I haven't changed anything.. but the problem with the custom hero survival is still existing. Here what happens when I try to host a game with this map :
http://www.prikachi.com/images/630/6216630e.jpg