Author Topic: I can't run euroloader..  (Read 3901 times)

Offline D^Rose

  • Junior Member
  • *
  • Topic Author
  • Posts: 22
  • Karma: +0/-0
    • View Profile
    • Awards
Re: I can't run euroloader..
« Reply #15 on: October 11, 2012, 23:22 »
You may have DirectX 11 but does your GFX card support it?
I dont know how can i check that? I downloaded and installed the one u gave me too

50Euro

  • Guest
Re: I can't run euroloader..
« Reply #16 on: October 11, 2012, 23:27 »
Click on the Start button and select Run. (For Vista Users, press the Windows Key (the key with the Windows logo on your keyboard) + R (at the same time)
- In the Open: field type in dxdiag and click the OK button.
- When the DirectX Diagnostic Tool loads up you will see information about your computer. Near the bottom of the information should be the following field: DirectX Version: which will list what version you are currently running.

ignore whats said above

check your pm

install this
http://www.microsoft.com/downloads/details.aspx?familyid=2da43d38-db71-4c1b-bc6a-9b6652cd92a3&displaylang=en


Disable then re-enable Direct 3D:

- Click Start (For Vista/7 Users, press the Windows Key (the key with the Windows logo on your keyboard) + R (at the same time) and skip to step 3)
- Click Run
- Type dxdiag and push Enter
- Select the Display tab
- Click the Disable button next to Direct3D Acceleration
- Click the Enable button next to Direct3D Acceleration and try the game again

update your graph driver

nvdia / ati , or whatever u got



if nothing helps try to add  " -openg" at your wc3 shortcut
« Last Edit: October 11, 2012, 23:30 by 50Euro »

Offline D^Rose

  • Junior Member
  • *
  • Topic Author
  • Posts: 22
  • Karma: +0/-0
    • View Profile
    • Awards
Re: I can't run euroloader..
« Reply #17 on: October 11, 2012, 23:28 »
Click on the Start button and select Run. (For Vista Users, press the Windows Key (the key with the Windows logo on your keyboard) + R (at the same time) and skip to step 3)
- In the Open: field type in dxdiag and click the OK button.
- When the DirectX Diagnostic Tool loads up you will see information about your computer. Near the bottom of the information should be the following field: DirectX Version: which will list what version you are currently running.
haha i know man kingw3 told me that allready and i checked, its DirectX 11

Offline kingW3

  • Partimanijak
  • Retired Moderator
  • MonsterKill Member
  • *
  • Posts: 2773
  • Country: cs
  • Karma: +219/-196
  • Awards GFX staff member [RARE]
    • View Profile
    • Awards
Re: I can't run euroloader..
« Reply #18 on: October 11, 2012, 23:29 »
You may have DirectX 11 but does your GFX card support it?
It doesn't matter for an old game that doesn't even require 9.0,basically if the card doesn't support directx 11 it wouldn't just work for games that need it
@D^Rose I guess we know the root of the problem i'll investigate it tomorrow and i'll edit this post or post a new post
@50Euro he all ready did that 2 times

50Euro

  • Guest
Re: I can't run euroloader..
« Reply #19 on: October 11, 2012, 23:32 »
Click on the Start button and select Run. (For Vista Users, press the Windows Key (the key with the Windows logo on your keyboard) + R (at the same time) and skip to step 3)
- In the Open: field type in dxdiag and click the OK button.
- When the DirectX Diagnostic Tool loads up you will see information about your computer. Near the bottom of the information should be the following field: DirectX Version: which will list what version you are currently running.
haha i know man kingw3 told me that allready and i checked, its DirectX 11
read my whole post manz :P and check ur inbox :)

if nothing helps u can cut my head :P

Offline mrNiceguy

  • Honored member
  • GodLike Member
  • *
  • Posts: 12013
  • Country: ba
  • Karma: +661/-685
  • Guess who's back :D
    • View Profile
    • When injustice becomes a LAW, resistance becomes a duty
    • Awards
Re: I can't run euroloader..
« Reply #20 on: October 12, 2012, 19:57 »
Click on the Start button and select Run. (For Vista Users, press the Windows Key (the key with the Windows logo on your keyboard) + R (at the same time) and skip to step 3)
- In the Open: field type in dxdiag and click the OK button.
- When the DirectX Diagnostic Tool loads up you will see information about your computer. Near the bottom of the information should be the following field: DirectX Version: which will list what version you are currently running.
haha i know man kingw3 told me that allready and i checked, its DirectX 11
read my whole post manz :P and check ur inbox :)

if nothing helps u can cut my head :P

why am I 1200% sure that you are dragoljub.
when we were fighting againt the biggest power hunger i ever met, MrNiceGuy. Now i see him in you, no, you became way worse than him. He at least had some heart, he cared about ppl who were with him all the time.

Offline yaphets_

  • Hero Member
  • *
  • Posts: 887
  • Karma: +20/-108
  • Nevermore Master
    • View Profile
    • Awards
Re: I can't run euroloader..
« Reply #21 on: October 13, 2012, 12:12 »
Click on the Start button and select Run. (For Vista Users, press the Windows Key (the key with the Windows logo on your keyboard) + R (at the same time) and skip to step 3)
- In the Open: field type in dxdiag and click the OK button.
- When the DirectX Diagnostic Tool loads up you will see information about your computer. Near the bottom of the information should be the following field: DirectX Version: which will list what version you are currently running.
haha i know man kingw3 told me that allready and i checked, its DirectX 11
read my whole post manz :P and check ur inbox :)

if nothing helps u can cut my head :P

why am I 1200% sure that you are dragoljub.

he is, i knew that it was him from his introduction.
Quote
who had never made a mistake, has never tried anything new ;)~albert einstein